Part Number Hot Search : 
2SB1212 700ETT SKIIP3 4S151K87 4A102 MC33342 HD153109 MA500RUI
Product Description
Full Text Search
 

To Download MAX6520 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 19-1130; Rev 0; 9/96
50ppm/C, SOT23, 3-Terminal, 1.2V Voltage Reference
_______________General Description
The MAX6520 is the lowest-power 1.2V, precision, three-terminal voltage reference offered in a SOT23-3 package. Ideal for 3V battery-powered equipment where power conservation is critical, the MAX6520 is a low-power alternative to existing two-terminal shunt references. Unlike two-terminal references that throw away battery current and require an external series resistor, the MAX6520 has a 70A maximum supply current (typically only 50A) that is independent of the input voltage. This feature translates to maximum efficiency at all battery voltages. The MAX6520 operates from a supply voltage as low as 2.4V, and initial accuracy is 1% for the SOT23 package. Output voltage temperature coefficient is typically only 25ppm/C, and is guaranteed to be less than 50ppm/C in the SOT23 package.
____________________________Features
o 3-Pin SOT23 Package o 50ppm/C max Tempco o Supply Current Independent of Input Voltage Over Temperature o 50A Supply Current o 2.4V to 11V Input Voltage Range o 1% Initial Accuracy
MAX6520
________________________Applications
Battery-Powered Systems Portable and Hand-Held Equipment Data-Acquisition Systems Instrumentation and Process Control
______________Ordering Information
PART MAX6520EUR-T TEMP. RANGE -40C to +85C PIN-PACKAGE 3 SOT23-3
* Contact factory for availability.
__________Typical Operating Circuit
V+ 2.4V to 11V VIN
__________________Pin Configuration
TOP VIEW
MAX6520
0.1F VOUT
VOUT 1.2V
VIN 1
MAX6520
VOUT 2
3 GND
GND
SOT23
0V
________________________________________________________________ Maxim Integrated Products
1
For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800
50ppm/C, SOT23, 3-Terminal, 1.2V Voltage Reference MAX6520
ABSOLUTE MAXIMUM RATINGS
Supply Voltage (VIN) ..............................................-0.3V to +12V VOUT ............................................................-0.3V to (VIN + 0.3V) Output Short-Circuit Duration ..........Continuous to Either Supply Continuous Power Dissipation (TA = +70C) SOT23 (derate 4mW/C above +70C) ...........................320mW Operating Temperature Range ...........................-40C to +85C Storage Temperature Range .............................-65C to +160C Lead Temperature (soldering, 10sec) .............................+300C
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
DC ELECTRICAL CHARACTERISTICS
(VIN = 2.4V, ILOAD = 0mA, TA = +25C, unless otherwise noted.) PARAMETER Output Voltage Output Voltage Temperature Coefficient Output Voltage Noise Line Regulation Load Regulation Quiescent Supply Current Change in Supply Current vs. Input Voltage Short-Circuit Output Current SYMBOL VOUT TCVOUT en VOUT/VIN MAX6520EUR CONDITIONS TA = +25C TA = TMIN to TMAX MIN 1.188 1.176 25 10 400 2 0.1 50 30 1 58 70 1.5 4.3 400 5 TYP 1.200 MAX 1.212 1.224 50 UNITS V V ppm/C Vp-p V/V V/A A A/V mA A
MAX6520EUR, TA = TMIN to TMAX 0.1Hz to 10Hz 10Hz to 10kHz VIN = 2.4V to 11V, TA = TMIN to TMAX (Note 1) TA = +25C TA = TMIN to TMAX (Note 1) VIN = 2.4V to 11V VOUT shorted to GND VOUT shorted to VIN
VOUT/IOUT ILOAD = -50A to 400A (Note 1) IQ IQ/VIN ISC
Note 1: Production testing done at TA = +25C, over temperature limits guaranteed by parametric correlation data.
__________________________________________Typical Operating Characteristics
(VIN = 3V, ILOAD = 0mA, TA = +25C, unless otherwise noted.)
SUPPLY CURRENT vs. INPUT VOLTAGE
MAX6520 TOC-01
OUTPUT VOLTAGE vs. INPUT VOLTAGE
MAX6520-02
SUPPLY CURRENT vs. TEMPERATURE
MAX6520 TOC-02
80
1.20010
75
SUPPLY CURRENT (A)
1.20005
70
SUPPLY CURRENT (A)
OUTPUT VOLTAGE (V)
70 VIN = 9V 65 VIN = 5V VIN = 3V 55
1.20000
60
60
1.19995
50 2 3 4 5 6 7 8 9 10 11 INPUT VOLTAGE (V)
1.19990 2 3 4 5 6 7 8 9 10 11 INPUT VOLTAGE (V)
50 -50 -25 0 25 50 75 100 TEMPERATURE (C)
2
_______________________________________________________________________________________
50ppm/C, SOT23, 3-Terminal, 1.2V Voltage Reference
____________________________Typical Operating Characteristics (continued)
(VIN = 3V, ILOAD = 0mA, TA = +25C, unless otherwise noted.)
LOAD REGULATION vs. TEMPERATURE
MAX6520 TOC-03
MAX6520
OUTPUT VOLTAGE vs. SOURCE CURRENT
MAX6520 TOC-05
POWER-SUPPLY REJECTION RATIO vs. FREQUENCY
MAX6520 TOC-06
0.32 LOAD REGULATION (V/A)
1.2001
120
OUTPUT VOLTAGE (V)
0.24
1.2000 PSRR (dB)
100
0.16
1.1999
80
0.08
1.1998
60
0 -50 -25 0 25 50 75 100 TEMPERATURE (C)
1.1997 1 10 100 1000 SOURCE CURRENT (A)
40 0.0001 0.001
0.01
0.1
.01
.10
FREQUENCY (kHz)
0.1Hz TO 100Hz NOISE
LOAD-TRANSIENT RESPONSE
A
50V/div
B
1s/div
10s/div A = OUTPUT CURRENT, 50A/div, ILOAD = 0A TO -50A B = OUTPUT VOLTAGE, 100mV/div
LOAD-TRANSIENT RESPONSE
LINE-TRANSIENT RESPONSE
A
IN
A
B
OUT
B
10s/div A = OUTPUT CURRENT, 500A/div, ILOAD = 0A TO 500A B = OUTPUT VOLTAGE, 100mV/div
5s/div A = INPUT VOLTAGE, 100mV/div, VIN = 3V 50mV B = OUTPUT VOLTAGE, 10mV/div
_______________________________________________________________________________________
3
50ppm/C, SOT23, 3-Terminal, 1.2V Voltage Reference MAX6520
_____________________Pin Description
PIN 1 2 3 NAME VIN VOUT GND FUNCTION Input Voltage Reference Output Ground
__________Applications Information
Input Bypassing
For the best line-transient performance, decouple the input with a 0.1F ceramic capacitor as shown in the Typical Operating Circuit. Locate the capacitor as close to the device pin as possible. Where transient performance is less important, no capacitor is necessary.
Output Bypass
The MAX6520 performs well without an output decoupling capacitor. If your application requires an output charge reservoir (e.g., to decouple the reference from the input of a DAC), then make sure that the total output capacitive load does not exceed 10nF.
+3V
VIN 1
VOUT
MAX6520
3
2 0.01F
0.1F
DIN 1 SCLK 3
CS 2
REFAB 12 11
REFC
OUTA DAC LATCH A DAC A 8 +3V
OUTB 16-BIT SHIFT REGISTER DATA (8) DAC LATCH B DAC B 9 VIN 1 VOUT R R
MAX6520
3
2 7 6 -1.2V
DAC LATCH C
OUTC DAC C +1.2V 10
2
MAX406A
CONTROL (8)
MAX512 MAX513
LOUT LATCH 14 4 RESET 5 VDD 7 VSS 6 GND
3 4 -3V
Figure 2. Low-Power 1.2V Reference Figure 1. 3V, Triple, 8-Bit Serial DAC
___________________Chip Information
TRANSISTOR COUNT: 39
4
_______________________________________________________________________________________
50ppm/C, SOT23, 3-Terminal, 1.2V Voltage Reference
__________________________________________________Tape-and-Reel Information
4.00.1 o1.50.1 2.00.05 1.750.1
MAX6520
8.00.2
4.00.1
3.50.05 o1.10.1
MARKING INFORMATION LOT SPECIFIC CODE AY X X = MAX6520
NOTE: DIMENSIONS ARE IN MM. AND FOLLOW EIA481-1 STANDARD.
ICs MAY ALSO BE MARKED WITH FULL PART NAME: MAX6520
_______________________________________________________________________________________
5
50ppm/C, SOT23, 3-Terminal, 1.2V Voltage Reference MAX6520
________________________________________________________Package Information
B
DIM A A1 B C D E e H L S INCHES MAX MIN 0.047 0.031 0.005 0.001 0.022 0.014 0.0034 0.006 0.120 0.105 0.055 0.047 0.080 0.070 0.098 0.082 0.012 0.004 0.022 0.017 8 0 MILLIMETERS MIN MAX 0.787 1.194 0.025 0.127 0.356 0.559 0.086 0.152 2.667 3.048 1.194 1.397 1.778 2.032 2.083 2.489 0.102 0.305 0.432 0.559 0 8
21-0051B
E
H
S
D
A
3-PIN SOT23-3 SMALL-OUTLINE TRANSISTOR PACKAGE
A1
e
C
L
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
6 ___________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 (408) 737-7600 (c) 1996 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products.


▲Up To Search▲   

 
Price & Availability of MAX6520

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X